Project Ref:
70161
Client: Alcoa of Australia Limited
Project: AU-MIN-290 Winches and Ropes
Scope: 115kN Luffing Winch

115kN line pull Winch

    After a successful supply of a replacement winch for boom luffing winch system in 2014 on Huntly 190 stacker, Alcoa engaged Eilbeck Crane Winch Division to supply a second 115 kN Line pull winch, drive, ropes (2 off) and base frame, which is to replace the existing luffing winch system (approximately 40 years old) on the 290 Stacker, located at the Alcoa Pinjara Stacking Stockpiles.

    The performance requirements for the two systems are the same and where possible the components for the 290 winch were manufactured the same.

    115 kN Line pull winch - Svendborg Hydraulic Brakes has built a solid reputation as a reliable supplier of modern innovative brake and supported throughout Australia and the world. Brevini and Regal CMG have supplied the proven shaft mounted gearmotor for both contracts.

    Project Ref:
    70008
    Client: ALCOA of Australia Limited
    Project: 190 Stacker Boom Luffing Winch
    Scope: Luffing Winch 115kN

    Project....................................... ........................... Kestrel Mine
    Winch Capacity......................... ........................... 115kN
    Line Speed................................ ........................... 12m/min
    Rope Diameter......................... ........................... 25mm
    Motor Power............................ ........................... 25.1m (each side)
    Motor Power............................ ........................... 15kW
    Winch Classification................. ........................... M6
    Winch Weight........................... ........................... 4700kg
    Winch Overall DIMs (HWD)..... ........................... (1560x2760x2720mm)
    Eilbeck Winches Projects

    Overland Conveyor Take Up Winch Jimblebar

    Eilbeck Crane has successfully completed the contract to supply a large conveyor 100t Take Up Winch for the Jimblebar…

    Counterweight Winches – Rio Tinto Marandoo

    The winch system is used to position the counterweight within the acceptable travel limits in the take-up tower.

    Kestrel Mine Extension - AM05 & AM07 Winches

    60kN Winch Closed Loop Tension Control

    12t Take-up Winch

    12t Take-up Winch, Rio Tinto Kestrel Mine Extension

    8t Take-up Winch

    8t Take-up Winches, NCIG Coal Export Terminal Stage 2

    Winches for Caval Ridge Project

    Eilbeck Cranes contract comprises of 13 off Winches ranging in capacity from 3.5 to 19.4 tonne line pull, 86 off Sheaves…

    Counter Weight Winch – Alcoa Myara Project

    Eilbeck delivered a repeat order for counter weight winch located on the tail end of existing conveyor at Alcoa Myrar…

    Dynamic Winch for Take-up Conveyor Belt

    Closed Loop Tension Control – a Winch for the 21st Century

    Static and Dynamic Winches for Hamersley Iron

    Eilbeck Cranes has successfully won another winch iron ore conveyor winch project though Calibre, which follow on the…

    Conveyor take-up Winches - NCIG Stage 2 John Holland

    Eilbeck Cranes again won the tender to supply static take-up winches for Newcastle Coal expansion stage two. The repeat…

    Water Quality Shutter Winch

    7.5t Water Quality Shutter Winch

    10t Take-up Winch

    Hamersley Iron and Rio Tinto recognise Eilbeck Winches not only to be a quality product but also comes with an…

    Take-up winches for the H4 Mine Project

    Hamersley Iron and Rio Tinto recognise Eilbeck Winches not only to be a quality product but also comes with an…

    Portal Winches

    The new winches have a 3 tonne pull at 4.0 m/min 140 m line capacity VSD control with a remote control, IP66 rotary…

    Dynamic and Static Conveyor Take-Up Winches

    Lake Lindsay Coal Project Dynamic and Static Conveyor Take-Up Winches

    7.5t Static Conveyor Take-Up Winches

    Thiess Sedgman Dawson Alliance Project 5 off Static Conveyor Take-Up Winches

    8t Dynamic Conveyor Take-Up Winches

    The conveyor take-up winch is supplied as a fully assembled unit mounted on a single base frame suitable for bolting…

    YouTube Facebook

    Sydney
    53 Lancaster Street
    Ingleburn NSW 2565
    Phone: 61 (02) 9618 1904

    Newcastle
    1/50 Sandringham Avenue
    Thornton NSW 2322
    Phone: 61 (02) 4966 8022

    Brisbane
    3/12 Sudbury Street
    Darra QLD 4076
    Phone: 61 (07) 3376 8255

    Mackay
    32 Diesel Drive
    Paget QLD 4740
    Phone: 61 (07) 4998 5599

    Perth
    28 Jackson Street
    Bassendean WA 6054
    Phone: 61 (08) 9279 4800

    Adelaide
    2/23 Clovelly Avenue
    Royal Park SA 5014
    Phone: 61 (08) 8162 5150

    Melbourne
    321 Doherty’s Road
    Truganina VIC 3029
    Phone: 61 (03) 9369 7444

    Copyright 2020 Eilbeck Cranes