Project Ref:
70002
Client: Calibre
Project: Western Turner Syncline
Scope: 12t Dynamic Take-up Winch
37t Static Conveyor Take-up Winch

The Winch Control System includes an embedded IEC 61131 control program. With modern VSD technology interfaced to the clients SCADA system high end control & diagnostics are achieved, realising a high quality, low downtime process.

Included in the Winch Control System is a 132kW variable speed drive which controls a 415VAC, 132kW winch motor. The VSD evaluates signals from the Plant Control System (PCS), field digital devices and a wire rope load cell. With these signals, the VSD controls the winch motor which in turn hauls in or pays out the wire rope, positioning the shuttle with respect to conveyor position. Whilst using multiple encoders, the system cross checks for transmission accuracy and absolute position of the hauled shuttle.


Scope: 37t Static Conveyor Take-up Winch - Calibre, Western Turner Syncline

The winch is used to lower gravity mass to ground during conveyor maintenance. The rope on the Take-up System travels around the sheave on the trolley, up and over the gravity tower and down to the winch at the tower base. The winch is meant to be used to tension up a conveyor (the conveyor can go regenerative). Electro-mechanical disc brake is integral with the motor. Power supply for the motor is 415V, 50Hz 3-phase, 4-wire and earth, derived from a 415V supply with a solidly earthed neutral. The feed circuits are separately protected for short-circuit, earth leakage and thermal overload.

Eilbeck Winches Projects

Overland Conveyor Take Up Winch Jimblebar

Eilbeck Crane has successfully completed the contract to supply a large conveyor 100t Take Up Winch for the Jimblebar…

Counterweight Winches – Rio Tinto Marandoo

The winch system is used to position the counterweight within the acceptable travel limits in the take-up tower.

Kestrel Mine Extension - AM05 & AM07 Winches

60kN Winch Closed Loop Tension Control

12t Take-up Winch

12t Take-up Winch, Rio Tinto Kestrel Mine Extension

8t Take-up Winch

8t Take-up Winches, NCIG Coal Export Terminal Stage 2

Winches for Caval Ridge Project

Eilbeck Cranes contract comprises of 13 off Winches ranging in capacity from 3.5 to 19.4 tonne line pull, 86 off Sheaves…

Counter Weight Winch – Alcoa Myara Project

Eilbeck delivered a repeat order for counter weight winch located on the tail end of existing conveyor at Alcoa Myrar…

Dynamic Winch for Take-up Conveyor Belt

Closed Loop Tension Control – a Winch for the 21st Century

Static and Dynamic Winches for Hamersley Iron

Eilbeck Cranes has successfully won another winch iron ore conveyor winch project though Calibre, which follow on the…

Conveyor take-up Winches - NCIG Stage 2 John Holland

Eilbeck Cranes again won the tender to supply static take-up winches for Newcastle Coal expansion stage two. The repeat…

Water Quality Shutter Winch

7.5t Water Quality Shutter Winch

10t Take-up Winch

Hamersley Iron and Rio Tinto recognise Eilbeck Winches not only to be a quality product but also comes with an…

Take-up winches for the H4 Mine Project

Hamersley Iron and Rio Tinto recognise Eilbeck Winches not only to be a quality product but also comes with an…

Portal Winches

The new winches have a 3 tonne pull at 4.0 m/min 140 m line capacity VSD control with a remote control, IP66 rotary…

Dynamic and Static Conveyor Take-Up Winches

Lake Lindsay Coal Project Dynamic and Static Conveyor Take-Up Winches

7.5t Static Conveyor Take-Up Winches

Thiess Sedgman Dawson Alliance Project 5 off Static Conveyor Take-Up Winches

8t Dynamic Conveyor Take-Up Winches

The conveyor take-up winch is supplied as a fully assembled unit mounted on a single base frame suitable for bolting…

YouTube Facebook

Sydney
53 Lancaster Street
Ingleburn NSW 2565
Phone: 61 (02) 9618 1904

Newcastle
1/50 Sandringham Avenue
Thornton NSW 2322
Phone: 61 (02) 4966 8022

Brisbane
3/12 Sudbury Street
Darra QLD 4076
Phone: 61 (07) 3376 8255

Mackay
32 Diesel Drive
Paget QLD 4740
Phone: 61 (07) 4998 5599

Perth
28 Jackson Street
Bassendean WA 6054
Phone: 61 (08) 9279 4800

Adelaide
2/23 Clovelly Avenue
Royal Park SA 5014
Phone: 61 (08) 8162 5150

Melbourne
321 Doherty’s Road
Truganina VIC 3029
Phone: 61 (03) 9369 7444

Copyright 2019 Eilbeck Cranes