Project Ref:
70035
Client: Hamersley Iron Pty Ltd
Project: Yandi Sustaining Project
Rio Tinto, Iron Ore Expansion Project
Scope: Supply 2 x 7t, 2 x 10t, 3 x 5.8t, 1 x 8t, and 1 x 8.1t Take-up Winches & sheaves

Winches Description

Each conveyor take-up winch is supplied as a fully assembled unit which consists of winch frame, rope drum, electric motor, motor brake, pawl system, slew bearing and planetary gear. The wire rope is also part of the winch and supplied loose. Each unit mounted on a single winch frame suitable for bolting either onto a concrete plinth and subsequent grouting or onto a steel structure.

The winch frame incorporates with sheaves and an anchor point for the wire rope. Each conveyor take-up winch will act on the associated take-up pulley trolley via a sheaved cable system. The winch motor is a 3 Phase 415 V Squirrel cage induction motor, and includes an electro magnetic brake. The Local Control Station provides access to control the winch assembly.

  • The Take up winch is powered by its geared electric brake motor.
  • The Take up winch includes a grooved spiral cut drum for accurate location of rope during operations.
  • The Take up winch includes a Electromagnetic Fast acting Fail safe High speed Brake, which acts directly on the NDE of the winch Motor.
  • The take up winch includes a Pawl Lock Mechanism with limit switch interlocks. This allows the drum to be locked mechanically. This can be used to support the load during normal operation in conjunction with High Speed Brake.
  • The drive is designed as single speed system, with full torque available at 50Hz
  • The drive has a modular construction of motor and gear unit to enable easy replacement.
  • Winch overload is evaluated by the actual current feedback and prevents raise and/or hauling operation.
  • The Take-up winch is controlled locally at the winch LCS / motor control cubicle.
  • The single-drum, single rope take up winch is manufactured to be a robust long-term take up winch.
  • The take up winch is supplied by a 3 phase + N Supply. It can be operated locally without the plant control system.
  • The take up winch fitted with slew bearing to allow drive unit removable without lowering take up mass.

Sheaves

Ø630 SHEAVE BLOCKS - Ø19MM ROPE-SHEAVE ASSEMBLY
Ø630 SHEAVE BLOCKS - Ø26MM ROPE-SHEAVE ASSEMBLY
Ø800 SHEAVE BLOCKS - Ø26MM ROPE-SHEAVE ASSEMBLY

Eilbeck Winches Projects

10t Take-up Winch

Hamersley Iron and Rio Tinto recognise Eilbeck Winches not only to be a quality product but also comes with an…

Take-up winches for the H4 Mine Project

Hamersley Iron and Rio Tinto recognise Eilbeck Winches not only to be a quality product but also comes with an…

Portal Winches

The new winches have a 3 tonne pull at 4.0 m/min 140 m line capacity VSD control with a remote control, IP66 rotary…

Dynamic and Static Conveyor Take-Up Winches

Lake Lindsay Coal Project Dynamic and Static Conveyor Take-Up Winches

7.5t Static Conveyor Take-Up Winches

Thiess Sedgman Dawson Alliance Project 5 off Static Conveyor Take-Up Winches

8t Dynamic Conveyor Take-Up Winches

The conveyor take-up winch is supplied as a fully assembled unit mounted on a single base frame suitable for bolting…

BMA Take Up Winches

Bechtel - BMA take up winches

Koolyanobbing Upgrades Take-Up Winches

Koolyanobbing Ore Handling Plant 11MTPA Upgrades 55kN & 40 kN M.R.C. Conveyor Take Up Winches

Bechtel 7.5t Take Up Winch

Comalco Weipa Project, Take-Up Winch 7.5t

8t Static Winches - NCIG

NCIG Coal Export Terminal Project

YouTube Facebook

Sydney
53 Lancaster Street
Ingleburn NSW 2565
Phone: 61 (02) 9618 1904

Newcastle
1/50 Sandringham Avenue
Thornton NSW 2322
Phone: 61 (02) 4966 8022

Brisbane
3/12 Sudbury Street
Darra QLD 4076
Phone: 61 (07) 3376 8255

Mackay
32 Diesel Drive
Paget QLD 4740
Phone: 61 (07) 4998 5599

Perth
28 Jackson Street
Bassendean WA 6054
Phone: 61 (08) 9279 4800

Adelaide
2/23 Clovelly Avenue
Royal Park SA 5014
Phone: 61 (08) 8162 5150

Melbourne
321 Doherty’s Road
Truganina VIC 3029
Phone: 61 (03) 9369 7444

Copyright 2021 Eilbeck Cranes