Project Ref: |
70160 |
|
Client: | Oaky Creek Joint Venture | |
Project: | Oaky Surface |
|
Scope: | Supply 60kN & 30kN Take-up Winches |
Winch Technical Data................. | ........................... | KOWN02 |
Winch Line Pull............................ | ........................... | 30kN |
Winch Classification.................... | ........................... | M2 |
Line Speed Nominal.................... | ........................... | 3m/min |
Rope Diameter............................. | ........................... | 18mm |
Rope Construction....................... | ........................... | QS816V(G)-1960MPa |
Rope Breaking Strength.............. | ........................... | 291kN |
Motor Power................................ | ........................... | 2.2 kW / 4 Pole |
Motor Starting.............................. | ........................... | DOL |
Brake............................................. | ........................... | Electro-Magnetic Integral with Motor |
Motor Braking Torque................. | ........................... | 30Nm |
Each conveyor take-up winch is supplied as a fully assembled unit which consists of winch frame, rope drum, electric motor, motor brake, pawl system, slew bearing and planetary gear. The wire rope is also part of the winch and supplied loose
Each unit mounted on a single winch frame suitable for bolting either onto a concrete plinth and subsequent grouting or onto a steel structure
The winch frame incorporates with sheaves and an anchor point for the wire rope
Each conveyor take-up winch will act on the associated take-up pulley trolley via a sheaved cable system
The winch motor is a 3 Phase 415 V Squirrel cage induction motor, and includes an electro magnetic brake
The Local Control Station provides access to control the winch assembly
18t Tilting Bridge Winch and 15.5t Shuttle Winch
18t Tilting Bridge Winch - Hoist System & 15.5t Shuttle Winch Groote…
Overland Conveyor Take Up Winch Jimblebar
Eilbeck Crane has successfully completed the contract to supply a large…
The Winch Control System includes an embedded IEC 61131 control program.…
These quality custom made winches built with an integrated engineering…
Counterweight Winches – Rio Tinto Marandoo
The winch system is used to position the counterweight within the…
12t Take-up Winch, Rio Tinto Kestrel Mine Extension
Kestrel Mine Extension - AM05 & AM07 Winches
60kN Winch Closed Loop Tension Control
8t Take-up Winches, NCIG Coal Export Terminal Stage 2
Winches for Caval Ridge Project
Eilbeck Cranes contract comprises of 13 off Winches ranging in capacity…
Counter Weight Winch – Alcoa Myara Project
Eilbeck delivered a repeat order for counter weight winch located on the…
Dynamic Winch for Take-up Conveyor Belt
Closed Loop Tension Control – a Winch for the 21st Century
Static and Dynamic Winches for Hamersley Iron
Eilbeck Cranes has successfully won another winch iron ore conveyor winch…
Conveyor take-up Winches - NCIG Stage 2 John Holland
Eilbeck Cranes again won the tender to supply static take-up winches for…
7.5t Water Quality Shutter Winch
Sydney
53 Lancaster Street
Ingleburn NSW 2565
Phone: 61 (02) 9618 1904
Newcastle
1/50 Sandringham Avenue
Thornton NSW 2322
Phone: 61 (02) 4966 8022
Brisbane
3/12 Sudbury Street
Darra QLD 4076
Phone: 61 (07) 3376 8255
Mackay
32 Diesel Drive
Paget QLD 4740
Phone: 61 (07) 4998 5599
Perth
28 Jackson Street
Bassendean WA 6054
Phone: 61 (08) 9279 4800
Adelaide
2/23 Clovelly Avenue
Royal Park SA 5014
Phone: 61 (08) 8162 5150
Melbourne
321 Doherty’s Road
Truganina VIC 3029
Phone: 61 (03) 9369 7444