Project Ref:
70075
Client: BMA Coal Operations PL
Project: Hay Point
Scope: 50kN Tele Chute Winch (Tilting Bridge Hoist Assembly Telescopic Chute Winch)

Winch Performance Features

  • The dual drum, single rope winch is manufactured as a Telescopic Chute Winch.
  • The Telescopic Chute Winch is both powered and controlled from the clients plant control system. This ensures the winching motions are interlocked with all other process plant machine moments, alarms & faults.
  • The Telescopic Chute Winch is primarily driven by its geared electric motor. The winch also includes a secondary pony drive braked motor that can be coupled to the gearbox and drum assembly.
  • The Telescopic Chute Winch includes a hydraulic power pack to control the high and low speed brakes. For the high speed brake, there is one fail safe spring return calliper acting directly on the motor shaft.
  • For the low speed brakes there are four fail safe spring return callipers acting on the winch drum brake disc.
  • The Telescopic Chute Winch includes Drum Lock Mechanism & Plunger Limit Switches. This allows the low speed brake disc & hoist drum to be locked mechanically. An electrical control interlock should inhibit motions whilst this arrangement is locked.
  • The Telescopic Chute Winch includes a grooved drum for accurate location of the rope during haul in operations. The grooves have left a right handing to match the (2) rope arrangements.
  • The Telescopic Chute Winch includes a hydraulic power pack for actuation of the low speed brake calipers. Pressure feedback switches assist the maintaining of correct hydraulic pressures.
  • The drive is designed as a singular speed system, with nominal line speed of 16m per minute.
  • The Telescopic Chute Winch is a dual drum, single rope, single layer system. The drive has a modular construction of motor and gear unit to enable easy replacement.
  • Winch Overload is evaluated by the clients plant control system.
  • The Telescopic Chute Winch includes a proximity switch to detect when the pony drive has been engaged to the gearbox. This switch shall prevent main winch motor from running as this will cause pony drive to over speed and sustain damage.
  • The Telescopic Chute Winch includes one mechanical limit switch per bar to detect position of rope. Positive feedback (contact closed) when rope is slack and switch is acted upon.
Eilbeck Winches Projects

Dynamic Winch for Take-up Conveyor Belt

Closed Loop Tension Control – a Winch for the 21st Century

Static and Dynamic Winches for Hamersley Iron

Eilbeck Cranes has successfully won another winch iron ore conveyor winch project though Calibre, which follow on the…

Conveyor take-up Winches - NCIG Stage 2 John Holland

Eilbeck Cranes again won the tender to supply static take-up winches for Newcastle Coal expansion stage two. The repeat…

Water Quality Shutter Winch

7.5t Water Quality Shutter Winch

10t Take-up Winch

Hamersley Iron and Rio Tinto recognise Eilbeck Winches not only to be a quality product but also comes with an…

Take-up winches for the H4 Mine Project

Hamersley Iron and Rio Tinto recognise Eilbeck Winches not only to be a quality product but also comes with an…

Portal Winches

The new winches have a 3 tonne pull at 4.0 m/min 140 m line capacity VSD control with a remote control, IP66 rotary…

Dynamic and Static Conveyor Take-Up Winches

Lake Lindsay Coal Project Dynamic and Static Conveyor Take-Up Winches

7.5t Static Conveyor Take-Up Winches

Thiess Sedgman Dawson Alliance Project 5 off Static Conveyor Take-Up Winches

8t Dynamic Conveyor Take-Up Winches

The conveyor take-up winch is supplied as a fully assembled unit mounted on a single base frame suitable for bolting…

BMA Take Up Winches

Bechtel - BMA take up winches

Koolyanobbing Upgrades Take-Up Winches

Koolyanobbing Ore Handling Plant 11MTPA Upgrades 55kN & 40 kN M.R.C. Conveyor Take Up Winches

YouTube Facebook

Sydney
53 Lancaster Street
Ingleburn NSW 2565
Phone: 61 (02) 9618 1904

Newcastle
1/50 Sandringham Avenue
Thornton NSW 2322
Phone: 61 (02) 4966 8022

Brisbane
3/12 Sudbury Street
Darra QLD 4076
Phone: 61 (07) 3376 8255

Mackay
32 Diesel Drive
Paget QLD 4740
Phone: 61 (07) 4998 5599

Perth
28 Jackson Street
Bassendean WA 6054
Phone: 61 (08) 9279 4800

Adelaide
2/23 Clovelly Avenue
Royal Park SA 5014
Phone: 61 (08) 8162 5150

Melbourne
321 Doherty’s Road
Truganina VIC 3029
Phone: 61 (03) 9369 7444

Copyright 2023 Eilbeck Cranes