| Project Ref: |
70035 |
|
| Client: | Hamersley Iron Pty Ltd | |
| Project: | Yandi Sustaining Project Rio Tinto, Iron Ore Expansion Project |
|
| Scope: | Supply 2 x 7t, 2 x 10t, 3 x 5.8t, 1 x 8t, and 1 x 8.1t Take-up Winches & sheaves | |
Winches Description
Each conveyor take-up winch is supplied as a fully assembled unit which consists of winch frame, rope drum, electric motor, motor brake, pawl system, slew bearing and planetary gear. The wire rope is also part of the winch and supplied loose. Each unit mounted on a single winch frame suitable for bolting either onto a concrete plinth and subsequent grouting or onto a steel structure.
The winch frame incorporates with sheaves and an anchor point for the wire rope. Each conveyor take-up winch will act on the associated take-up pulley trolley via a sheaved cable system. The winch motor is a 3 Phase 415 V Squirrel cage induction motor, and includes an electro magnetic brake. The Local Control Station provides access to control the winch assembly.
- The Take up winch is powered by its geared electric brake motor.
- The Take up winch includes a grooved spiral cut drum for accurate location of rope during operations.
- The Take up winch includes a Electromagnetic Fast acting Fail safe High speed Brake, which acts directly on the NDE of the winch Motor.
- The take up winch includes a Pawl Lock Mechanism with limit switch interlocks. This allows the drum to be locked mechanically. This can be used to support the load during normal operation in conjunction with High Speed Brake.
- The drive is designed as single speed system, with full torque available at 50Hz
- The drive has a modular construction of motor and gear unit to enable easy replacement.
- Winch overload is evaluated by the actual current feedback and prevents raise and/or hauling operation.
- The Take-up winch is controlled locally at the winch LCS / motor control cubicle.
- The single-drum, single rope take up winch is manufactured to be a robust long-term take up winch.
- The take up winch is supplied by a 3 phase + N Supply. It can be operated locally without the plant control system.
- The take up winch fitted with slew bearing to allow drive unit removable without lowering take up mass.
Sheaves
Ø630 SHEAVE BLOCKS - Ø19MM ROPE-SHEAVE ASSEMBLY
Ø630 SHEAVE BLOCKS - Ø26MM ROPE-SHEAVE ASSEMBLY
Ø800 SHEAVE BLOCKS - Ø26MM ROPE-SHEAVE ASSEMBLY
Sydney
53 Lancaster Street
Ingleburn NSW 2565
Phone: 61 (02) 9618 1904
Fax: 61 (02) 9605 5171
[email protected]
Newcastle
1/50 Sandringham Avenue
Thornton NSW 2322
Phone: 61 (02) 4966 8022
Fax: 61 (02) 4964 2285
[email protected]
Brisbane
3/12 Sudbury Street
Darra QLD 4076
Phone: 61 (07) 3376 8255
Fax: 61 (07) 3376 1255
[email protected]
Mackay
32 Diesel Drive
Paget QLD 4740
Phone: 61 (07) 4998 5599
Fax: 61 (07) 4998 5756
[email protected]
Perth
28 Jackson Street
Bassendean WA 6054
Phone: 61 (08) 9279 4800
Fax: 61 (08) 9378 3689
[email protected]
Adelaide
Unit 3/132-134 Port Wakefield Rd
Cavan SA 5094
Phone: 61 (08) 8162 5150
Fax: 61 (08) 8162 5160
[email protected]
Melbourne
Unit 3A/1 Leo Court
Derrimut VIC 3030
Phone: 61 (03) 8353 2444
Fax: 61 (03) 8353 2456
[email protected]